Practical Uses of Silage Wrap

Silage wrap is an easy way to protect your hay from the elements while at the same time making good use of that space you have available in your yard. Once the bales are in place, you can store them for the winter months and use them again the following year. The only way to get all that hay stored adequately is to follow the package’s instructions strictly. You should not use any pesticides, herbicides, or growth promoters. These products can kill the grass that you want to grow, so be careful when handling them. If you want to realise the practicality of silage wraps, learn here:

Silage WrapThe first step to using silage wrap is to prepare your forage for the season. For the most optimal outcome, wrap bales in 50-60% pre-stretch natural sun films, pre-roll film to 55%, and use at least three layers over each bale. Never put bales too close together, or else the hay will not be able to absorb moisture completely. If bales are rolled in wet soil or grass, they will shrink, which will reduce the effectiveness of the treatment. If the grass is very wet, it may even drown the bales, so roll them as far away from the ground as possible.

You will want to take several days to thoroughly prepare the grass before wrapping it in the silage wrap. It allows the grass to dry out entirely while also building up its nutrients. During this period, you will want to water the grass every couple of days and add any fertiliser or other nutrients that the package advertises. The reason for this cycle of feeding is so the bales will have the best chance of lasting through the summer and beyond.

After the grass has finished drying out, you will want to place the bales inside the Silage Wrap. Silage wrap can be built right over the bales, and this will protect them from both the elements and the elements within the bales themselves. A layer of felt or some insulation will help keep the moisture out while still allowing air to circulate the bales. It is common for balls to be stacked on top of one another, so they should all be placed in a single layer. If the bales are laid in a single layer, there will be no need to position them correctly.

Baling material such as sawdust, straw, paper and wood pulp is excellent for use in the preparation of silage wrap plastic. These materials are all entirely natural, contain no chemicals or additives, and will decompose completely in the environment. Paper is an excellent option because it is easily recycled and disposed of (if it is not consumed), and the fibres hold onto moisture beautifully. Straw and sawdust are ideal because they hold up against heat, sun, rain, chemicals and electricity. Many people use a straw for their consumption, but sawdust and paper can also be purchased cheaply at local retailers (or even online).


The last step of preparing baled forage for Silage Wrap preparation is to cover all items with a plastic membrane. This membrane can be constructed using a few simple but essential principles. First, the plastic sheet’s width must be greater than the length; this is necessary for two reasons. First, the width will help define the shape of the plastic, and second, the width will help define the internal space within the bales. Remember, the plastic will absorb moisture and air, so it is essential to leave some space for air circulation within the container.